Hallo,
habe möglicherweise durch Unachtsamkeit den SCL/SDA zerschossen (E2 Pin9+10).
Frage:
Wie kann man das prüfen ?
Codec funktioniert nicht mehr, ebenfalls der VV von DC2PD. Auch wenn ich jeweils nur ein Gerät anstecke.
Als Schutz möchte ich zukünftig zwischen RedPitaya und Peripherie Tansistoren/IC einfügen.
Für die Aus-/Eingänge hab ich eine Lösung.
Was kann ich für SCL/SDA nehmen ? Meines Wissens ist der SDA bidirektional.
Kann man den RedPitaya noch irgendwo "stand alone" bestellen, also ohne Netzteil etc....
Vielen Dank für eure Hilfe
RedPitaya SCL/SDA defekt
Re: RedPitaya SCL/SDA defekt
Hi Uli
The simplest way to analyze a I2C bus is to plug an entry level logic analyzer on the output of the Red Pitaya
https://www.amazon.fr/AZDelivery-Logic- ... alyzer+fx2
If you are in a hurry, your also can use an Arduino (nano, uno, whatever) and load an I2C sketch
https://playground.arduino.cc/Main/I2cScanner
if you intend to protect your I2C bus, you can add an ADUM isolator
http://www.analog.com/media/en/technica ... 0_1251.pdf
Several model can be used, choose the one you prefer
The only precaution you must have when using these components is to use a really close decoupling cap of the vdd rail. Adum are prone to oscillate, but a simple 100 nF will calm down the chip
hope this will help
good luck
Marc f6itu
The simplest way to analyze a I2C bus is to plug an entry level logic analyzer on the output of the Red Pitaya
https://www.amazon.fr/AZDelivery-Logic- ... alyzer+fx2
If you are in a hurry, your also can use an Arduino (nano, uno, whatever) and load an I2C sketch
https://playground.arduino.cc/Main/I2cScanner
if you intend to protect your I2C bus, you can add an ADUM isolator
http://www.analog.com/media/en/technica ... 0_1251.pdf
Several model can be used, choose the one you prefer
The only precaution you must have when using these components is to use a really close decoupling cap of the vdd rail. Adum are prone to oscillate, but a simple 100 nF will calm down the chip
hope this will help
good luck
Marc f6itu
Re: RedPitaya SCL/SDA defekt
Hallo Uli,
ich habe noch das gefunden:
https://www.ebay.de/itm/1-pcs-F5314-Cli ... laYw4z[url][/url]
sowie:
http://www.ti.com/lit/ds/symlink/iso1541.pdf[url][/url]
https://www.mikroe.com/i2c-isolator-click[url][/url]
ich habe noch das gefunden:
https://www.ebay.de/itm/1-pcs-F5314-Cli ... laYw4z[url][/url]
sowie:
http://www.ti.com/lit/ds/symlink/iso1541.pdf[url][/url]
https://www.mikroe.com/i2c-isolator-click[url][/url]