Hallo Red Pitaya - SDR Freunde,
es gibt eine neue Info von dem Pavel.
Quelle: Red Pitaya Forum
****
I've added inputs for PTT, DASH and DOT. They are connected to the pins DIO0_N, DIO1_N and DIO2_N of the extension connector E1:
http://wiki.redpitaya.com/index.php?tit ... connectors
These inputs are active-low with internal pull-up.
I've also added an output pin for the pre-amplifier/attenuator control. It's connected to the pin DIO1_P of the extension connector E1. When used with PowerSDR mRX, this pin is controlled by the first ATT combo-box.
The new version (0.94-871) is now available via the Red Pitaya application market place. I've also updated the customized SD card image.
****
Es gibt jetzt die Möglichkeit mit einer externen PTT den Red Pitaya auf Sendung zu schalten.
Ebenso einen Input für dash und dot. (Alles noch nicht getestet) Sondern nur zur Info für die, die nicht regelmäßig in dem Forum aktiv sind.
73de DL2BBF
Hans
externe PTT und input für dash and dot
Re: externe PTT und input für dash and dot
Gibt es hier im Forum,
und schon die neuere 0.94-872.
Schau Dir auch die Links an, dann benötigst Du keinen Bazaar mehr.
73 Jörg
http://forum.cq-nrw.de/viewtopic.php?f=11&t=25
und schon die neuere 0.94-872.
Schau Dir auch die Links an, dann benötigst Du keinen Bazaar mehr.
73 Jörg
http://forum.cq-nrw.de/viewtopic.php?f=11&t=25
Die Bässe breit die Höhen schmal das ist der Funk aus Wuppertal.
Re: externe PTT und input für dash and dot
Hallo Heino,
hat sich das Thema erledigt, war das vor oder nach unserem Telefonat?
Gruß Jörg
hat sich das Thema erledigt, war das vor oder nach unserem Telefonat?
Gruß Jörg
Die Bässe breit die Höhen schmal das ist der Funk aus Wuppertal.