Power/swr meter with "openhpsdr transceiver" frmwr

Die Hardware des Red Pitaya
Antworten
Benutzeravatar
f6itu
Offline
Beiträge: 42
Registriert: Fr Sep 29, 2017 7:13 pm

Power/swr meter with "openhpsdr transceiver" frmwr

Beitrag von f6itu » Do Jan 03, 2019 6:06 pm


Hi

Amongst the many way PowerSDR mRX manages the forward and reflected power display, one consists using 2 analog input (plugged to a so called "commodity ADC on HPSDR hardware), those two lines comming from the FWD and REV power voltages delivered by a simple VSWR tandem bridge.
I'd like to know if such a possibility has been considered in Pavel's firmware (using for example analog inputs available on E2 connector)

Cheers
Marc f6itu

Benutzeravatar
DH1KLM
Offline
Beiträge: 223
Registriert: Sa Mär 26, 2016 9:12 pm

Re: Power/swr meter with "openhpsdr transceiver" frmwr

Beitrag von DH1KLM » Fr Jan 04, 2019 7:15 am


Hello Marc,
yes it is possible. I did it this way.
viewtopic.php?f=32&t=308
73 de Sigi, DH1KLM

Benutzeravatar
Yevgeni
Offline
Beiträge: 21
Registriert: Fr Jul 29, 2016 7:24 pm

Re: Power/swr meter with "openhpsdr transceiver" frmwr

Beitrag von Yevgeni » Fr Jan 04, 2019 11:40 am


Hi!
Dateianhänge
RP_E2.jpg
RP_Anan7000.jpg
RP_UI.jpg

Benutzeravatar
Yevgeni
Offline
Beiträge: 21
Registriert: Fr Jul 29, 2016 7:24 pm

Re: Power/swr meter with "openhpsdr transceiver" frmwr

Beitrag von Yevgeni » Fr Jan 04, 2019 11:44 am


Hello
4 x slow ADCs RP.

Benutzeravatar
f6itu
Offline
Beiträge: 42
Registriert: Fr Sep 29, 2017 7:13 pm

Re: Power/swr meter with "openhpsdr transceiver" frmwr

Beitrag von f6itu » Sa Jan 05, 2019 9:38 am


Thank you, Siegfried and Yevgueni

I was just remembering something like that, but couldn't retreive this info.

I'll try to add some buffering or limitation (Zener ? ) to avoid killing the gpio. Thanks again to both of you, you make my day :- DD

Marc f6itu

Benutzeravatar
f6itu
Offline
Beiträge: 42
Registriert: Fr Sep 29, 2017 7:13 pm

Re: Power/swr meter with "openhpsdr transceiver" frmwr

Beitrag von f6itu » Sa Jan 05, 2019 5:44 pm


I've probably read more than 100 times Pavel's notes... how could I have missed this. Or, worst, refuse to see it.
"slow analog inputs can be used for the forward (Analog input 0) and reverse (Analog input 1) power measurement"

I really feel ashame not Reading The Fucking Manual

Really
Marc

Antworten